1075 4.3mm Chopper Knife Blade Blank

1075 4.3mm Chopper Knife Blade Blank


1075 4.3 mm Chopper Knife Blade Blank.

Availability: Out of stock SKU: 1075-GB-4

(E-mail when Stock is available)


1075 Carbon Steel Chopper Knife Blade Blank is a fast way to get straight into creating a chopper knife.

All required is to tidy up the profile, grind the bevels, drill pin holes, heat treat and fit a handle.

1075 is suitable steel for new makers and experts alike, the ease of home heat treating and its excellent performance characteristics make working with 1075 easy.

This blank is cut by waterjet so there is no heat-affected zone.

Note: 1075 Carbon Steel Chopper Knife Blade Blank comes annealed (soft).

Alloy Composition:

Element %
Carbon: 0.70-0.80%
Manganese: 0.40-0.70%
Sulfur: 0.050%
Phosphorus: 0.030%

Recommended Heat Treatment:

  • Heat at 815°C.
  • Quench in Houghton’s G Medium Quench Oil or a high flash point vegetable oil such as canola at 50-60°C.
  • 2 tempering cycles for 2 hours each at around 175-200 degrees depending on desired hardness” – higher tempering temps are likely to leave 1075 a bit soft for knives.

Recommended working hardness 60 – 65 HRC.


4.3 x 280 mm.

Often purchased with: Handle MaterialsPins Fasteners and Adhesives

Keep shopping: 1075 Steel »

Additional information

Weight 0.3 kg
Dimensions 28 × 4 × 0.5 cm


There are no reviews yet.

Be the first to review “1075 4.3mm Chopper Knife Blade Blank”

has been added to your cart:
Artisan Supplies