1hp (0.75 kw) 240 volt fixed speed motor
1hp (0.75 kw) 240 volt, fixed speed motor to suit Noob Grinder or disc grinder. Foot and Flange mountings and 19mm shaft. Does not come with power cable.
Out of stockEmail to a friend
|NOOB-1HP||1hp (0.75 kw) 240 volt, fixed speed motor to suit Noob Grinder or disc grinder. Foot and Flange mountings and 19mm shaft|
|NOOB-1.5HPVS||1.5 HP (1.1 kw) variable speed motor only suitable for use with VFD speed control. Also Great for disc grinders. Foot and Flange mountings and 19mm shaft (See Note)|
|LBG-2HP||2 HP (1.5kw) 240 Volt 3 phase (requires VFD above for single phase use). 2 pole motor with B14A Flange and 90S Metric mounts. Suits little buddy grinder and disc grinder discs. 24mm shaft|
|TAG101-2HPM||2 HP (1.5kw) 240 Volt 3 phase (requires VFD above for single phase use). 56C Flange and foot mount. Suits TAG101. 5/8” Shaft|
|LBG-VFD||3HP (2.2kw) Suits all of our variable speed motors. Sealed Variable frequency speed controller. IP 65 prevents entry of metal dust,240 volt single phase in, electronically converts to 240 Volt, 3 phase out to suit motors.|
|LBG-WIRE||Wiring kit to suit above VFDs and Motors, includes pictorial instructions, dust proof glands and all terminals ready for your electrician to connect.|
Note: Variable speed motors are three phase motors, The VFD converts your single phase power into 3 phases to control the speed of the motor. When used with a VFD you only need single phase power to run them. Unless you have 3 phase power you cannot run them without a VFD.
|Dimensions||33.5 x 26.5 x 19.5 cm|
Product enquiry about 1hp (0.75 kw) 240 volt fixed speed motor
SKU: NOOB-1.5HPVSAdd to cart