Counterbore 3/8″. Counterbore Pilot 1/4″ x 5/32″ shaft that this item takes is sold separately here.
- Additional information
- Reviews (0)
Counterbore 3/8″ takes a Counterbore Pilot with 5/32″ shaft.
Use in conjunction with the correct Counterbore Pilot with 5/32″ shaft to create flat bottom countersunk holes for handle fasteners.
The counterbore cuts a space for the head of the fastener to sit flush or below the surface of the handle material. Using the correct size counterbore for the barrel or thread of the fastener ensures that the counterbore hole is perfectly centered.
Grub screw on side of counterbore takes a 1.3 mm hex or T5 torx drive/bit.
Purchase the Counterbore Pilot 1/4″ x 5/32″ Shaft that the Counterbore 3/8″ requires via the below link:
|KMHFT-CBP-1/4||Counterbore Pilot 1/4″ x 5/32” Shaft|
|Dimensions||10.20 × 0.80 × 0.80 cm|