Integral Behnke Carbide File Guide


Integral Behnke Carbide File Guide 95 x 50 x 15 mm.

Availability: In stock SKU: KMFG-INT
View cart


Integral Behnke Carbide File Guide is used to set an accurate and symmetrical stop when grinding or filing. The vee block design works well for straightening the bolster face of integrated bolster knives so that they fit perfectly in the handle. Machined from alloy steel to form a hardened guide that is resistant to ceramic abrasives and is precisely accurate.

These file guides are constructed of 4142 HT Alloy Steel and have three bits of C2 Carbide on them.

Similar to all of the Behnke guides, The C2 Carbide Blanks are Surface Ground! The fact that this is ground ensures that the bolster’s surfaces are in the same plane as the handle. When creating strengthened knives, it’s a huge time saver.


  • Plates of carbide create a flat surface for consistent grinds.
  • Resistant to ceramic abrasives.
  • Easily adjustable.

The pins are 1/4-20 socket cap screws with a 1 3/4″ length and an Allen wrench included. Abrasives other than diamond files have little effect on carbide.

At maximum width, this integral file guide measures 95 x 50 x 15 mm

Note: Ceramic belts will scratch but should not be detrimental in the performance of this tool. Avoid overheating while grinding as this will cause the carbide to crack or delaminate. This is not a clamp – over-tightening, especially on a small cross-section can cause the carbide to crack or delaminate. Not suitable for use with Silicon Carbide and Diamond Abrasives. Aluminium oxide and most ceramic belts will not damage the carbide.

Keep shopping: File Guides »

Additional information

Weight 0.3 kg
Dimensions 95 × 50 × 15 cm

Medium, Small


There are no reviews yet.

Be the first to review “Integral Behnke Carbide File Guide”