Kiln Paragon Bluebird XL
- Glass Bead Annealing
Package Price: Contact us for current pricing.
Package includes: 240 Volt 50HZ.
Kiln Paragon Bluebird XL
The BlueBird XL has durable insulating firebricks in the walls and floor. The BlueBird XL has durable insulating firebricks in the walls and floor. The element is mounted in the roof and embedded in a special high-tech, vacuum-formed ceramic fiber panel. This reduces dust inside the kiln.
(Note: The BlueBird XL is fired at the Paragon factory before the outside metal is painted. This is to harden the liquid rigidizer on the ceramic fiber insulation. This may leave black or brown marks on the insulation. These marks are normal.)
Customize the Doors
The BlueBird XL now comes with two types of doors: a 10” x 4” short door and a 10” x 4 1/4” tall door.
The 10” x 4” short door has a 1/2” gap under the door and includes a double mandrel holder. Place bead rods on the mandrel holder, which cradles the rods at two points. Because of the gap, the door remains closed even with bead mandrels in the kiln. Adjust the height of the mandrel holder by loosening screws underneath.
The bottom of the 10” x 4 1/4” tall door, in the closed position, is flush against the kiln floor. An adjustable bead mandrel holder supports the bead mandrels at a single point.
The standard BlueBird XL comes with a short door on the left and tall door on the right. However, you can order your kiln with two short doors or two tall doors. The doors are interchangeable, so you can reverse the doors of a standard BlueBird XL later. As you can see, this is a versatile kiln.
Door Latches Keep Doors Closed; Magnets Hold Doors Open
Side latches hold the doors closed while the kiln is heating to annealing temperature. Phenolic knobs on the door handles stay cool to the touch. Rare-earth magnets hold the doors open when needed. A safety switch on the front panel turns off power to the controller when the kiln is not in use.
We have added a stainless steel glass rod warmer on top of the kiln. Pre-heating glass rods saves production time.
The steel base supports the kiln in two layers. The upper steel base supports and strengthens the firebrick floor; the lower steel base covers the entire kiln bottom where it rests on your worktable. Electrical components are mounted to the lower base, away from the heat of the firing chamber.
To save table space, the Sentry Xpress digital controller is mounted under the kiln in an ergonomic sloped panel for easy operation. The built-in base stays cool even during extended hold times for the long life of the electrical system. It is slotted to dissipate heat and comes with mar-proof plastic feet.
The Blue Bird XL plugs into a standard household outlet. The kiln ships by convenient UPS. It ships in a special carton with vacuum-formed padding to assure that the kiln will arrive safely.
And, of course, the BlueBird XL is made in America to exacting standards. The kiln is coated with durable high-temperature water base paint, which produces low emissions during spraying. This is better for our employees and the environment.
Features of the BlueBird XL
- 3-key digital Sentry Xpress controller
- 1 each 4” high short door and 4 1/4” high tall door for the ultimate in versatility
- Door latches to hold the doors closed while fusing glass
- 9” deep firing chamber (measured with doors closed)
- Firebrick roof, walls, and floor
- 1”-thick ceramic fiber doors
- Mandrel holders with 20 slots
- 1500°F maximum temperature
- Pinless element grooves in the roof
- Coated firebricks in roof
- Mar-proof plastic feet
- On-off safety switch
The Sentry Xpress 3-key controller is packed with features. It includes two modes: Single Speed and 8-segment Ramp-Hold. The solid state controller continually monitors the firing so you can spend your time productively without closely watching the kiln. The sealed controller touch pad keeps out dust and is easy to wipe clean.
The controller is easy to use. Read the manual and watch the instructional videos on our website. The kiln includes a Quick Start programming guide and a 16-page controller instruction manual, printed in color.
You will be amazed at the convenience of digital firing. The reliable solid-state Sentry Xpress controller continually monitors the firing so you do not need to closely watch the kiln. (Please remember, however, to check the kiln occasionally during firing and to monitor it near the expected shutoff time.) You can try out a demonstration of the controller on your computer by clicking here.
Features of the Sentry Xpress 3-key Controller on Paragon Fusion Kilns
- Program up to 8 segments (steps) in Ramp-Hold mode.
- Fire to a single temperature at a single speed in Single Speed mode.
- Store up to 4 programs in Ramp-Hold mode.
- Skip a segment in Ramp-Hold without having to stop the kiln to reprogram. (For instance, you want to skip to the annealing segment.)
- Change the target temperature in Ramp-Hold during firing without stopping the kiln to reprogram.
- Hold (soak) the temperature in both Single Speed and Ramp-Hold.
- Add Hold Time during firing without having to stop the firing to reprogram.
- Easily control both heating and cooling in Ramp-Hold.
- Program Review lets you check the program you are about to fire.
- Program the Temperature Alarm to sound when the kiln reaches a specific temperature. Program an alarm that will remind you to check on the kiln.
- Temperature display throughout firing and cooling in your choice of °F or °C
- Thermocouple Offset adjusts the thermocouple readout.
- Set the Delay to turn on the kiln at a time that best suits your busy schedule.
- Error Messages report mechanical problems.
- The sealed touch pad keeps out dust and is easy to wipe clean.
- LED Lights show whether you are in program, review, or firing mode.
- Colorful, illustrated instruction manual. Download it from the “Additional Information” section below to review all the controller features in more detail.
For more information about the Kiln Paragon Bluebird XL see the Paragon web page
Important Note: The new Bluebirds are made of fiber and Paragon does not recommend Kiln Wash.
|Dimensions||50.8 × 73.7 × 43.2 cm|
Product enquiry about Kiln Paragon Bluebird XL
SKU: HS-37-023-140Add to cart
SKU: HS-09-080-140Add to cart
SKU: HS-09-160-140Add to cart
SKU: PS-GB-G3-70FAdd to cart
SKU: HS-37-023-220Add to cart
SKU: HS-62-031-220Add to cart
SKU: HS-09-047-140Add to cart
SKU: HS-37-050-140Add to cart
SKU: MAGICFUSEAdd to cart
SKU: HS-37-031-220Add to cart
SKU: HS-09-047-220Add to cart
SKU: HS-37-050-220Add to cart