Kiln Paragon GL24ADTSD

$8,999.00

Availability: Out of stock SKU: GL24ADTSDFS

(E-mail when Stock is available)









Description

Paragon GL-24ADTSD Glass Fusing Kiln

Create breathtaking glass in the deluxe GL-24ADTSD Professional Series glass kiln. The GL-24ADTSD is proudly made in America by skilled craftsmen and is designed for those whose livelihood depends on glass production. Bullseye Glass uses the GL-24ADTSD in their factory and writes, “The GL-24s in our teaching studio have survived hundreds of classes and dozens of artist residencies.”

Paragon’s warranty is not affected by frequency of use. Fire your new kiln every day if you want, even in commercial or school settings. That will have no effect on the warranty.

Elements in the top, walls, and door

The GL-24ADTSD digital kiln heats from the top, three sides and door for unsurpassed heat distribution. It is 15” high inside with room to bend glass for curved windows or cabinet doors and to repair lampshades. Make huge glass-fused platters. Crack the door to drag a rod across the softened glass or to emboss designs in the surface. Explore small-to-medium sized casting and pâte de verre. Enjoy the glittering beauty of dichroics. Make treasured gifts.

The GL-series lid elements use an element groove that eliminates element pins. The element coils are wider than the groove opening, so the elements stay in place without pins. The elements in the walls are seated and protected in dropped, recessed grooves.

Use the kiln’s side heat for taller projects such as drop-out vases sagged through a ring mold. Side elements span the three walls in six horizontal rows.

The kiln’s door elements offer unsurpassed heat distribution for difficult pieces. (The door, with elements, is always hinged on the right side.)

Adjust the ratio of heat between the top and walls

The kiln uses advanced power ratio technology, pioneered by Paragon, to balance the heat between the top and side/door elements. Program the digital controller to balance the heat between the top and sides in increments of 10%. (i.e., 100% top – 0% sides, 50% top – 50% sides, 80% top – 20% sides, etc.) Set the heat balance for any combination desired between the top and sides so that the total heat output equals 100%. Imagine the precise control you will have in adjusting the kiln to slump glass or to improve heat distribution over large fused panels.

Heavy-duty construction

Paragon’s GL-series are made for years of rigorous firing, as artists all over America can attest. The insulating firebrick, wrapped in heavy-gauge steel, soak up heat for slow, efficient cooling. A double heat shield and air gap between the kiln and ventilated switch box help keep electrical components cool for long, trouble-free service. Costly, heavy-gauge nickel-plated copper wiring is covered with high-temperature glass-braided insulation.

Spring-Loaded door latches

The spring-pressure latch and a ½” recess around the edge of the firebrick door keep the door tightly closed. The door remains rock-steady on a heavy hinge shaft. Four hand lifts aid moving. The base is open in the back and slotted to dissipate heat.

Thermocouple with “special limit” wire

The thermocouple senses temperature inside the kiln. It is the small rod that extends into the firing chamber. The ¼” wide Type-K, 14-gauge, exposed-tip thermocouple is made with special-limit wire for superior accuracy. The exposed tip gives the controller a fast response time for even temperatures during holds. The thermocouple is made in America to our exacting standards.

Designed for production

Paragon’s warranty is not affected by frequency of use. Fire your new kiln every day if you want, even in commercial settings. That will have no effect on the warranty period.

Additional information

Weight 200 kg
Dimensions 102 × 102 × 102 cm

Reviews

There are no reviews yet.


Be the first to review “Kiln Paragon GL24ADTSD”