Nickel Alloy Steel 15N20 (3.3 x 38 x 1220 mm)

$79.00

nickel-alloy-carbon-steel-15n20-3-3-x-38-x-1220-mm

Availability: Out of stock SKU: 15N20-130-1.5-48

(E-mail when Stock is available)









Description

15N20  is basically a  simple carbon steel  also containing Nickel . Its primary use  by bladesmiths, gunsmiths and other manufacturers of “Damascus “ pattern welded steel, is to provide a contrasting  layer when forge welded to simple carbon steels. It can also be used like 1075 or 1084 as a cutlery steel in its own right. 15N20 is not supplied annealed.

Recommended Working Sequence For 15N20

Forging:  to 2150 °F (1175 °C). Do not forge below 1500 °F (815 °C)

Normalizing: Heat to 1600 °F (870 °C). Cool in still air. Follow up with further refinement cycles.

Annealing: Heat to 1500 °F (815 °C). Furnace cool to 1200 °F (650 °C) at a rate not exceeding 50 °F (28 °C) per hour.

Grinding or Machining

Hardening: Austenitize- Heat to no higher than 1500 °F (815 °C). Quench in G-Quench or equivalent oil.

Tempering:  As-quenched hardness of approximately 65 HRC. Hardness can be adjusted downward by proper tempering max 392°F (200 °C)

steel over 1metre cannot be sent to a PO box

Steel Description and Range

Part Number Steel Type Dimensions (Imperial) Dimensions (Metric)
15N20-058-1.5-48 15N20 0.058 x 1.5 x 48″ 1.47 x 38 x 1220 mm
15N20-072-1.5-48 15N20 0.078 x 1.5 x 48″ 1.98 x 38 x 1220 mm
15N20-130-1.5-48 15N20 0.130 x 1.5 x 48″ 3.3 x 38 x 1220 mm
15N20-095-1.5-48 15N20 0.095 x 1.5 x 48″ 2.41 x 38 x 1220 mm
15N20-095-2-48 15N20 0.095 x 2 x 48″ 2.41 x 50 x 1220 mm
15N20-095-14-39 15N20 0.095 x 14 x 39” 2.41 x 350 x 1000 mm

Save

Additional information

Weight 1.24 kg
Dimensions 122 × 3.8 × 0.33 cm

Reviews

There are no reviews yet.


Be the first to review “Nickel Alloy Steel 15N20 (3.3 x 38 x 1220 mm)”